33 posts / 0 new
Last post
stePH
stePH's picture
Offline
Joined: 04/01/2014 - 13:15
Need Help - how to do a common delay effect?

There's this effect I've heard in countless tracks, from psychedelic rock to various kinds of EDM.

It's certainly based in a delay, but each successive repeat of the processed sound is louder than the one before it - or the volume stays constant instead of fading - and it also gets more distorted each time.

Here's an example; from about 4:20 to about 5:15, what the guitar is doing.
https://www.youtube.com/watch?v=hSsjxbRxgqY

I can't seem to get this effect using either the master delay or the add-in delay box; how is it done?

Josh L
Josh L's picture
Offline
Joined: 03/14/2015 - 15:14
Use the add in delay and

Use the add in delay and push foldback to maximum.

Check out mah soundcloud: http://www.soundcloud.com/josh-oelal

Xenoplas
Xenoplas's picture
Offline
Joined: 10/26/2014 - 14:34
and then automate the post of

and then automate the post of the foldback :)

stePH
stePH's picture
Offline
Joined: 04/01/2014 - 13:15
I didn't understand that at

I didn't understand that at all. Automate what now?

Xenoplas
Xenoplas's picture
Offline
Joined: 10/26/2014 - 14:34
the post of the distortion

the post of the distortion effect. post is the ouput volume of the effect ;) you wanted it to get louder after all

stePH
stePH's picture
Offline
Joined: 04/01/2014 - 13:15
Foldback is distortion? I

Foldback is distortion? I thought it was just how much repeat you got from the delay.

anickt
anickt's picture
Offline
Joined: 08/16/2014 - 20:32
Analog delay pedal with the

Analog delay pedal with the feedback maxed out. The distortion is a function of maximum feedback. I used to have an Electro-Harmonix Deluxe Memory Man that would do that. All analog circuitry. You can emulate it in Caustic but nothing sounds quite like frying analog.

anickt

Pan65
Pan65's picture
Offline
Joined: 12/02/2012 - 12:04
To get more constant levels

To get more constant levels on your delays use a compressor.  That will push down the highest levels to the level you want. I would route the the signal to a modular and mix it with the original machine to taste, this also gives you more eq options for your delay.

derrtiblu
derrtiblu's picture
Offline
Joined: 03/08/2014 - 23:00
Sooo if i catchin' what pan65

Sooo if i catchin' what pan65 is sayin' inna agreement and with all the others not one of them is sayin' the other is wrong. Soo, i guess u wanna machine input on whatever u use for your song. Modulate the distorted foldback with a compressor and delay weather mixer delay or modsynth delay....

sounds like something of a dual sound of stereo not mono channel. I guess u can fake stereo. But why???? I mean if u automate the sound u get the layer of how u can create your own tail length how it rides the song.

Add appreggiator.... u take the song in other directions.

stePH
stePH's picture
Offline
Joined: 04/01/2014 - 13:15
Did some experimenting with

Did some experimenting with the delay "pedal" - at maximum foldback, the sound apparently NEVER stops or diminishes in volume. Need to figure out how to make it stop when I need it to. It also doesn't seem to distort, so I tried feeding the source to a modular synth input and putting that through a filter and/or some kind of envelope modulation - but it seems I don't really know how to work most of these modules. Will experiment further.

skarabee
skarabee's picture
Offline
Joined: 05/15/2012 - 07:52
If you want to achieve this

If you want to achieve this kind of effect, like the Memory man (good one Anickt, I have one in my guitar rig), you have to put your processing (filter, distortion) inside the feedback loop. The delay FX (pedal) won't allow you to do this. But going modular way, you can use the delay module, send its output back in the signal flow, and inserting filter/dist in the way. 

See songfile with a modular preset. 

The first delay control the general delay time. the second delay is for ping-pong process.

Knobs adjustments: the 3:1 mixer module output knob control the feedback. Same thing for the distortion module out. You can control/stop the overall delay by automating one of these. Be careful, as it can start in infinite feedback, same thing on analog devices...use it at your own risk ;-) 

Tip: you can attach the note velocity from the modular to the filter cutoff, and then control your filter by playing notes at different velocities.

This is a basic template, you can use another filter, add a second distortion stage...

Caustic Song file (optional): 

derrtiblu
derrtiblu's picture
Offline
Joined: 03/08/2014 - 23:00
Sounds like i was wrong,

Sounds like i was wrong, yeeeeeeeessssss!!!!!!

Wellsley
Wellsley's picture
Offline
Joined: 10/29/2014 - 11:56
I used to have an old tape

I used to have an old tape delay box similar to an echoplex, altering the delay and reverb by changing the distance between the recording and playback heads, used to get some wild sounds, been trying to achieve something similar in Caustic, without too much success, I will have a look at your file skarabee with interest, thanks

skarabee
skarabee's picture
Offline
Joined: 05/15/2012 - 07:52
I remember these tape delay,

I remember these tape delay, I had a Roland delay machine with similar functions. You can't achieve this in Caustic, because of the nature of the delay (it just delay the signal, no pitch involved). And the pitch of an incoming Machine input can't be changed. I have other sort of Modular delays effect here:

https://sites.google.com/site/thecausticsessions/causticpacks

 

Xenoplas
Xenoplas's picture
Offline
Joined: 10/26/2014 - 14:34
oops I kinda misread what

oops I kinda misread what josh wrote so I left out some steps ^^ anyway you have your answer now so I don't really have to say anymore right?

anickt
anickt's picture
Offline
Joined: 08/16/2014 - 20:32
@skarabee

@skarabee

​Your tape delay preset gets some pretty nice results. I added a filter and saturator to the feedback loop from the original saturator. It gets pretty crazy. Looking forward to using this. Thanks

anickt

stePH
stePH's picture
Offline
Joined: 04/01/2014 - 13:15
That's a pretty ace

That's a pretty ace configuration, skarabee! I'm gonna be using this on my current track to add some cool psychedelic effects - maybe record some guitar licks and play them back from the PCMsynth through your modular delay rig.

I notice that if the saturation knob is beyond a certain point (like about four-o-clock) the sound never stops; have to turn the knob back down to make the effect die out. I can fix that with a little automation, I'm sure.

Pan65
Pan65's picture
Offline
Joined: 12/02/2012 - 12:04
The saturation knob add a

The saturation knob add a little extra level to the signal and that's why the feedback never stops. If you want to saturate more you need to turn down the output level on the satisfaction module.

stePH
stePH's picture
Offline
Joined: 04/01/2014 - 13:15
I made an 8-bar pattern for

I made an 8-bar pattern for the Modular, set the note trigger in the first bar, and then pattern-automate the saturation level to rise or fall as needed. I've made two such patterns so far with different saturation curves; I'll make a few more.
As said before, I'll record a few short guitar licks and put them in the PCM; then trigger them with these automated Modular patterns. This is gonna make my track really pop.

Anickt, I'm still new at this. Might you put up your variation on skarabee's preset with the extra filter and saturator?

anickt
anickt's picture
Offline
Joined: 08/16/2014 - 20:32
Yes I'll upload it as soon as

Yes I'll upload it as soon as I get a chance. Extended Thanksgiving celebration tonight. laugh

anickt

anickt
anickt's picture
Offline
Joined: 08/16/2014 - 20:32
@stePH Here you go  

@stePH

Here you go

 

Caustic Song file (optional): 

anickt

anickt
anickt's picture
Offline
Joined: 08/16/2014 - 20:32
https://www.dropbox.com/s

https://www.dropbox.com/s/3tfzzi0rveir0zh/TAPE%20DELAY%20REV.caustic?dl=0

In case the file upload doesn't work (it's not for me) here's a Dropbox link.  Just do Download>Direct Download and you should get an Open In page. 

anickt

skarabee
skarabee's picture
Offline
Joined: 05/15/2012 - 07:52
happy to see that one of my

happy to see that one of my trick working for you guys! hope to hear the result. I can't really work on music these days, because of a broken shoulder. So I have time to listen to other's tracks.

Xenoplas
Xenoplas's picture
Offline
Joined: 10/26/2014 - 14:34
what happened skara? ^^  

what happened skara? ^^
 

stePH
stePH's picture
Offline
Joined: 04/01/2014 - 13:15
Anickt, your file won't open

Anickt, your file won't open in my Caustic. Trying to do so from within Caustic just reverts back to whatever song was currently loaded.

I tried from my Android file explorer to open in Caustic, and I get the message that my Caustic is out of date and I need to upgrade. You made this in a beta, didn't you? If so I can't open it until Rej pulls the trigger on an official update.

anickt
anickt's picture
Offline
Joined: 08/16/2014 - 20:32
stePH - yes I made it in beta

stePH - yes I made it in beta. I haven't run into any major issues so I forget that it is still beta.

anickt

anickt
anickt's picture
Offline
Joined: 08/16/2014 - 20:32
I re-did in in OSX Caustic 3

I re-did it in OSX Caustic 3.1. Try this. It's mostly getting some cool feedback effects. Not really more delay.

Caustic Song file (optional): 

anickt

TheZEROProject
TheZEROProject's picture
Offline
Joined: 06/16/2013 - 14:14
If the song isn't loading,

If the song isn't loading, the file is either corrupted or the download didn't finish properly.

VIOLENT NEUROSIS (YouTube) ...https://www.youtube.com/user/ViolentNeurosis

stePH
stePH's picture
Offline
Joined: 04/01/2014 - 13:15
If the song isn't loading,

If the song isn't loading, the file is either corrupted or the download didn't finish properly.

Or, as stated before, anickt used a beta version of Caustic and its save files are incompatible with the stable release that I'm using.

derrtiblu
derrtiblu's picture
Offline
Joined: 03/08/2014 - 23:00
@ steph, anickt did do 3.1.

@ steph, anickt did do 3.1. version and it is posted herre!!! but i think the taste of the knobs is lil off cause rej did add alot two the knob value two balance more accurate mix quality. but the file is posted in this thread u made.

peace

anickt
anickt's picture
Offline
Joined: 08/16/2014 - 20:32
@derrtiblu

@derrtiblu

​You're right. The last one I uploaded I did in 3.1. Yes, the knobs are to be played with. I just left them wherever I had them when I saved the song. cool

anickt

TheZEROProject
TheZEROProject's picture
Offline
Joined: 06/16/2013 - 14:14
@StePH Chill, that wasn't

@StePH Chill, that wasn't necessary... I mention data corruption because I've gone through a few snags where data wasn't completely or properly transferred when I was moving projects to a backup drive, and the way the song-loading issue is described above sounds similar to that type of thing.

VIOLENT NEUROSIS (YouTube) ...https://www.youtube.com/user/ViolentNeurosis

stePH
stePH's picture
Offline
Joined: 04/01/2014 - 13:15
I haven't tried the 3.1

I haven't tried the 3.1 upload yet. But my track is up and it uses some guitar samples passed through skarabee's setup. Look for "The Only Way to Fly" in Show & Tell; the effect is used in the last 3-1/2 minutes.