Sounds alright to me. I had the unfortunate luck to start playing the track while my headphones were at full blast though -_-. Anyone else who might want to listen to it, make sure you don't do that. This beat needs some slight volume reduction lol.
Sounds a bit distorted, but I'm looking at 250hz needs at least a -4 dB cut at Q=1.2 ---- target the bongo drum with that freq, or it's attached to the loop you're playing at.
I would lower this section (or "bus") by at least -3 dB, because it seems like you aim to bring in some much larger elements and percussion as this piece progresses.
Good luck, I'm curious how this ends up, sounds like it's going to be rather groovy..
Sounds pretty good actually, nice use of delay :) the general sound is very nice and a great groove, I dont think it needs any work apart from as others say volume reduction. The distortion sounds quite nice here imo, whether it is clipping or not.
If it's clipping that's creating that sound, fine... If it sounds good it sounds good :)
I make creative EDM utilising Caustic and many other Daws. See for yourself on my SoundCloud, you may like it :) https://soundcloud.com/xandyaudio thanks!
I love the I love the enthusiasm but it's actually a mess up I was sending you all the original and I was going to master and I left the parametric eq high in a spot. But I could still hear the step so I was satisfied with my result from the original question
I'm on speakers with low volume right now so no garantuee but it sounds totally alright right now to me ;)
'Askar
https://www.soundcloud.com/xenoplas
Sounds alright to me. I had the unfortunate luck to start playing the track while my headphones were at full blast though -_-. Anyone else who might want to listen to it, make sure you don't do that. This beat needs some slight volume reduction lol.
That's just a sample of a much larger track. Thanks guys
OnPoint™ Productions
Sounds a bit distorted, but I'm looking at 250hz needs at least a -4 dB cut at Q=1.2 ---- target the bongo drum with that freq, or it's attached to the loop you're playing at.
I would lower this section (or "bus") by at least -3 dB, because it seems like you aim to bring in some much larger elements and percussion as this piece progresses.
Good luck, I'm curious how this ends up, sounds like it's going to be rather groovy..
I think the distorted sound was intentionally :O
'Askar
https://www.soundcloud.com/xenoplas
Sounds pretty good actually, nice use of delay :) the general sound is very nice and a great groove, I dont think it needs any work apart from as others say volume reduction. The distortion sounds quite nice here imo, whether it is clipping or not.
If it's clipping that's creating that sound, fine... If it sounds good it sounds good :)
I make creative EDM utilising Caustic and many other Daws. See for yourself on my SoundCloud, you may like it :) https://soundcloud.com/xandyaudio thanks!
I love the I love the enthusiasm but it's actually a mess up I was sending you all the original and I was going to master and I left the parametric eq high in a spot. But I could still hear the step so I was satisfied with my result from the original question
OnPoint™ Productions
Result
OnPoint™ Productions